🍑 PEACH TREES AND OTHERS

🍑 AQUASOL AGRO for peach, nectarine, and apricot trees

Peach, nectarine, and apricot trees are fruit trees whose healthy development depends largely on adequate water availability during the critical periods of flowering, fruit set, and fruit enlargement.

AQUASOL AGRO helps maintain available moisture in the root zone, promoting more efficient use of irrigation water and helping reduce water stress during the driest periods of the year.

🌱 Root characteristics of peach, nectarine, and apricot trees
Unlike almond trees—which are very hardy, have deep roots, and are highly drought-tolerant—these stone fruits are sensitive to root suffocation and poorly drained soils; excess stagnant moisture in heavy clay soils can harm them.

Implications for AQUASOL HYDRO: here, the logic is reversed compared with almond trees: “more retention is always better” does not apply. AQUASOL HYDRO is particularly useful in well-drained soils, where it helps maintain available moisture without waterlogging; caution and more conservative dosages are recommended in heavy clay soils or soils with poor drainage.

🌱 Recommended application

  • Young and mature trees.
  • New plantings.
  • Replanting.
  • Well-drained soils (recommended); use caution in heavy clay soils.
  • Sandy soils or soils with low water retention.

✅ Benefits

💧 Greater moisture retention
🚿 Irrigation optimization
🌱 Improved root development
☀️ Reduced water stress
🍑 Improved resistance to water stress without waterlogging
💰 Potential water savings

📦 Recommended dosage

Young tree (0–2 years):
7 g per tree

Developing tree (2–5 years):
70 g per tree

Mature tree (+5 years):
7 g per cm of trunk

Example: 50 cm trunk = 350 g

Very dry, sandy soils or soils under severe water stress:
The dosage can be adjusted according to field conditions, water availability, soil texture, and irrigation system.

📋 AQUASOL AGRO recommendation
AQUASOL AGRO is preferably applied in well-drained soils. In heavy clay soils or soils prone to waterlogging, reduce the dosage and avoid prolonged moisture accumulation around the root crown.

🚜 Compatible application methods

AQUASOL AGRO can be applied manually or using agricultural machinery compatible with granules.

Manual application:
Mix the product with the soil near the root zone during planting or around the tree.

Mechanized application:

  • 🚜 Centrifugal fertilizer spreaders.
  • 🚜 Localized fertilizer spreaders.
  • 🚜 Granular fertilizer spreaders.
  • 🚜 Mechanized planting equipment.
  • 🚜 Band applicators.
🔧 Technical recommendation
Lightly incorporate the product into the soil and perform an initial irrigation to activate its water absorption and retention capacity.

🚿 Irrigation frequency

AQUASOL AGRO helps maintain moisture for longer. Irrigation intervals should be adjusted progressively according to soil type, tree age, climate, and irrigation system.

❓ Frequently asked questions

Is it equally suitable for peach, nectarine, and apricot trees?
Yes, these three stone fruit trees have similar root behavior and the same application recommendations.

Is it compatible with drip irrigation?
Yes, it is compatible with drip irrigation, sprinkler irrigation, and other agricultural systems.

Can it be used in intensive agriculture?
Yes, it can be used in both intensive and traditional farming operations.

Where should it be applied?
In the root zone, avoiding direct contact with the tree crown and prioritizing well-drained soils.

📞 Request a personalized quote

Our team can calculate the ideal dosage based on the rootstock, soil, and irrigation system.

Request a quote via WhatsApp